|
Product Details:
|
| Product Name: | 11KW 8t/H Fertilizer Mixer Machine At NPK Fertilizer Production LIne | Type: | Mixing Equipment |
|---|---|---|---|
| Capacity: | 2-8t/h | Color: | Customers' Demand |
| Application Scope: | Fertilizer Mixing | Installation: | Dispatch Engineer If Needed |
| High Light: | 8t/h Fertilizer Mixer Machine,premix feed Fertilizer Mixer Machine,11KW Fertilizer Mixer Machine |
||
11KW 8t/H Fertilizer Mixer Machine At NPK Fertilizer Production LIne
Introduction of Horizontal Mixer Machine
Horizontal ribbon mixer is widely used in chemical, pharmaceuticals, food, and construction line. It can be used to mix the powder with powder, powder with liquid, and powder with granule. Under the driven of the motor, the double ribbon agitator mixes the material quickly. The outer ribbon pushes the material from the two ends to the centre, the inner ribbon pushes the material from the centre to the two ends. Thus to achieve material convention. The discharging port is set in the bottom centre, with the help of the outer ribbon, the material can be discharged completely, and no dead zone.
Features of Horizontal Mixer Machine
In the mixer body inside, all the material can be mixed uniformly, using new rotary structure, the minimum space between rotary and cover can be reduced to zero, it can effectively decrease the material residual. It adds oil adding pipe in the inside so that the mixer is compact structure, beautiful appearance, easy to operation and maintence
The mixer is suitable for personal farmer, small and medium feed mills, can be matched with screw conveyor or bucket elevator to lift all kinds of material, used to produce premix feed, concentrated mesh feed, and complete mesh feed.
Advantages of Horizontal Mixer Machine
1. Horizontal tank body covers a small area
2. Bearing is on both ends of the mixer, the material is not easy to enter, repair rate is low.
3. Gearbox drive the auger shaft, simple maintenance, high efficiency, save both time and labour.
4. U- Shape tank bottom, easy operate, stir uniformly, no dead angle, better for material discharge and cleaning.
5. Under the bottom or the sides of the tank, there is a flap dome valve (pneumatic control or manual control) of the centre. The valve is arc design to make sure no material deposit and no dead angle when mixing. There are a lid and fence on the top of the tank, it seals the tank well so that no powder will come out during mixing
Parameter of Horizontal Mixer Machine
| Model | Capacity(t/h) | Power(kw) | Rotation Speed | Dimensions |
| (r/min) | (L× W ×H)(mm) | |||
| WJ600×1200 | 1.5-2 | 5.5 | 45 | 2100×1100×900 |
| WJ700×1500 | 2-3 | 7.5 | 45 | 2300×1150×1100 |
| WJ900×1500 | 3-5 | 11 | 45 | 2300×1300×1200 |
| WJ1000×2000 | 5-8 | 15 | 45 | 2900×1400×1400 |
FAQ
1. Q: Can the logo or company name to be printed on the products or package?
A: Sure. Customer's logo or company name can be printed on products by stamping, printing, embossing, coating or sticker.
2. Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
3. Q: How does your factory do regarding quality control?
A: Quality is a priority. We always attach great importance to quality control from the very beginning to the end of the production. Every product will be fully assembled and carefully tested before it's packed for shipment.
Contact Person: Abby
Tel: +8618037670342
